![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
Good Morning All,
This has been documented in my thread a while back but hopefully more people will see this here and provide help.
https://www.vxoc.org.uk/forum/Thread-yes...ra-J-Elite
I've got a recurring issue and I've already changed a number of things however the issue persists.
When I start the car, randomly, the car sometimes will start to crank, stop and then continue and eventually start. When this happens however it enters some sort of limp mode and advises 'Service Vehicle Soon'. So to confirm, the car struggled to start but started first time, out of the drive, no power. Struggles to rev past 2k and over 15mph is a push but not EML light on.
The quickest way to resolve this I have found is to clear the fault codes and the car starts fine next time around.
Plugging my OBD and Delphi in I get the P0193 error it states Fuel Rail Pressure Sensor Circuit, high voltage. I've already changed the fuel rail sensor for a brand new part and the issue still persists.
What on earth could be causing this?
I've already done the following:
- Changes Glow Plug Cyl 3, my car has the stop start so really expensive to change all of them.
- Changed Fuel Rail High Pressure Sensor
- Removed, cleaned and tested EGR Valve. Cleaned first time around when this happened, we had it off and tested the mechanism off the battery, the EGR opened and closed without issue.
![[Image: gTRDJYp.png]](https://i.imgur.com/gTRDJYp.png)
This has been documented in my thread a while back but hopefully more people will see this here and provide help.
https://www.vxoc.org.uk/forum/Thread-yes...ra-J-Elite
I've got a recurring issue and I've already changed a number of things however the issue persists.
When I start the car, randomly, the car sometimes will start to crank, stop and then continue and eventually start. When this happens however it enters some sort of limp mode and advises 'Service Vehicle Soon'. So to confirm, the car struggled to start but started first time, out of the drive, no power. Struggles to rev past 2k and over 15mph is a push but not EML light on.
The quickest way to resolve this I have found is to clear the fault codes and the car starts fine next time around.
Plugging my OBD and Delphi in I get the P0193 error it states Fuel Rail Pressure Sensor Circuit, high voltage. I've already changed the fuel rail sensor for a brand new part and the issue still persists.
What on earth could be causing this?
I've already done the following:
- Changes Glow Plug Cyl 3, my car has the stop start so really expensive to change all of them.
- Changed Fuel Rail High Pressure Sensor
- Removed, cleaned and tested EGR Valve. Cleaned first time around when this happened, we had it off and tested the mechanism off the battery, the EGR opened and closed without issue.