2:nd-Feb-2015, 21:11:35
tucpal Wrote:it will all depend on the connector and what pins are in there
we know you dont have the fuse so no power
so check that first then i can work out what is missing
as i said it is not that straight forward doing the heated seats as you might think
just fit the seats first
then try the button on the side of the seat
and see if the lumber support moves
if not we need to add power and ground then they will work
no problems at all on that one
last time i checked the heater controls were about £180.
and second hand ones are rare for the standard AC controls
Yeah I didn't think the heated seats were going to be as easy as the lumbar support anyaay. The garage I spoke too said they will just get the power from somewhere else for the lumbar support and then look into the heated seats later...
Looking like I might be waiting a while for that to be done tbh, didn't realise it was £180 for the controls!! :(
Do we have any kind of trade discount on here to help me bring that price down...or does the masterfit discount entitle me to money off parts like that?