![[-]](https://vxoc.org.uk/forum/images/dark1.8/collapse.png "[-]")
1:st-Apr-2017, 11:49:44
I finally got around to tidying up the cables and here are some pics from under the hood: left headlamp, right headlamp.
The cables on the left headlamp were a tangled up mess compared to the ones on the right so I had to be creative with the copex tubing (or is it kopex?) .
Also, I previously mentioned that I wasn't able to screw in the 2 most outer screws that hold the bumper. Well, I'm human. As such, I made a mistake.
While I was tending to the cables I noticed that the headlamps do have mounting holes for those 2 screws but they don't line up with the bumper screw holes (you can actually see the screw hole in the second picture). They are off by about 6-8 mm center to center. The bumper seems to be positioned correctly so, on one sunny day, I will take the bumper off and fiddle around with the headlamp position until everything lines up and I'll realign the beams for the final time.
The cables on the left headlamp were a tangled up mess compared to the ones on the right so I had to be creative with the copex tubing (or is it kopex?) .
Also, I previously mentioned that I wasn't able to screw in the 2 most outer screws that hold the bumper. Well, I'm human. As such, I made a mistake.
While I was tending to the cables I noticed that the headlamps do have mounting holes for those 2 screws but they don't line up with the bumper screw holes (you can actually see the screw hole in the second picture). They are off by about 6-8 mm center to center. The bumper seems to be positioned correctly so, on one sunny day, I will take the bumper off and fiddle around with the headlamp position until everything lines up and I'll realign the beams for the final time.