|
Grinding rotating noise from GTC? - Printable Version +- VXOC Astra-J/GTC (https://vxoc.org.uk/forum) +-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5) +--- Forum: Astra-J/GTC (https://vxoc.org.uk/forum/forumdisplay.php?fid=19) +--- Thread: Grinding rotating noise from GTC? (/showthread.php?tid=4106) |
Grinding rotating noise from GTC? - MattDe123 - 31:st-Oct-2018 Hi all, Got a little problem with the GTC 2014 Sport CDTI 2.0L. Recently its been making this horrible grinding noise. The noise is really loud when I turn the car on in the morning, it eases away when the car is warmed up a bit but does not disappear. It seems to be coming from under the engine but I can't be sure. A lot of information online has pointed to the DMF or clutch release bearing, not sure which applies to me. The noise is made when; - The car is turnt on, gear in neutral, clutch decompressed - First gear, second gear and can even hear it slightly in higher up gears - When the clutch is disengaged When I push down the clutch, the noise seems to go and returns when I put it into gear and release the clutch. I've attached a short video (turn up volume) Look forward to your replies, any info would be useful Thanks, Matt RE: Grinding rotating noise from GTC? - johno1412 - 31:st-Oct-2018 that sounds very much like the dual mass failing RE: Grinding rotating noise from GTC? - MattDe123 - 1:st-Nov-2018 (31:st-Oct-2018, 19:44:37)johno1412 Wrote: that sounds very much like the dual mass failing Yeah i thought so too |