VXOC Astra-J/GTC
LED’s for up level display - Printable Version

+- VXOC Astra-J/GTC (https://vxoc.org.uk/forum)
+-- Forum: Astra-J/GTC Section (https://vxoc.org.uk/forum/forumdisplay.php?fid=5)
+--- Forum: Request for information (https://vxoc.org.uk/forum/forumdisplay.php?fid=24)
+--- Thread: LED’s for up level display (/showthread.php?tid=3767)



LED’s for up level display - sparkyscfc74 - 18:th-Feb-2018

Hi, could anyone give me a link for some PLCC-2 side view LED’s in bright white? I’m going to change them in my up level display and looking on eBay and can only see surface mounted ones unless I’m missing something
Thanks in advance


Sent from my iPhone using Tapatalk


RE: LED’s for up level display - Rusty2009 - 19:th-Feb-2018

These are ones I use I just turn them on their side work 100% fine.

These are also the best White one's I have found for brightness.

https://www.ebay.co.uk/itm/50x-XENON-WHITE-3528-PLCC-2-SURFACE-MOUNT-ULTRA-BRIGHT-LEDS-PLCC2-SMT-SMD/310402822610?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649


LED’s for up level display - sparkyscfc74 - 19:th-Feb-2018

Cheers Rusty


Sent from my iPhone using Tapatalk


RE: LED’s for up level display - Rusty2009 - 19:th-Feb-2018

No worries I've got loads here if you want me to pop some in post?


LED’s for up level display - sparkyscfc74 - 19:th-Feb-2018

Yeah that would be great if you don’t mind? I can send you some money through PayPal if that’s ok?


Sent from my iPhone using Tapatalk


RE: LED’s for up level display - Rusty2009 - 19:th-Feb-2018

Not a problem PM your address & I'll get them posted for you.
How many do you want?


LED’s for up level display - sparkyscfc74 - 24:th-Feb-2018

So I’ve found out I’m not very good at soldering I think my actual problem was de-soldering because taking the old LED’s out seemed to take some of the board with it probably because I’m a heavy handed welder!! Anyway after much messing around I’ve managed to get 3 out of 4 working. It’s ok just a bit dull where it says speed.
[Image: e97846aab5245fce57ed160981c11a98.jpg][Image: c7d862ce2066f510af96ed66ba8902d5.jpg]


Sent from my iPhone using Tapatalk


RE: LED’s for up level display - Rusty2009 - 24:th-Feb-2018

Doesn't look too bad that mate it's not very noticeable.


RE: LED’s for up level display - sparkyscfc74 - 24:th-Feb-2018

No it's not too bad, just waiting to see how it looks at night. I found the dismantling and re-assembly quite easy thanks to your how to Rusty, I just think my rev counter just wants tweaking slightly unless it's the camera angle!


RE: LED’s for up level display - Rusty2009 - 24:th-Feb-2018

Yeah it looks slightly off a little tip when you have it right plug in it & turn key to pos 2 it stops the needles bouncing when you clip it back it.


LED’s for up level display - sparkyscfc74 - 11:th-Mar-2018

(24:th-Feb-2018, 18:59:38)Rusty2009 Wrote: Yeah it looks slightly off a little tip when you have it right plug in it & turn key to pos 2 it stops the needles bouncing when you clip it back it.


I’ve ordered some solder glue today for the 4th led that I couldn’t get working, but if that doesn’t work I’m going to wire it from one of the other LED’s.
When I fit it I’ll also make sure the needles go back on right,


Sent from my iPhone using Tapatalk

I’m thinking about changing the led on the door lock/ unlock switch so the unlock is green, is there a how to on here for it?


Sent from my iPhone using Tapatalk

I've now found the thread for changing the LED on the unlock button, seems simple enough Smile