Please note new users with 0 posts will have to have their first 2 posts approved by a Moderator or Admin. There is no point posting the same post / thread multiple times staff have a life and can't be expected to be on the forum 24/7. (December 17, 2016)



Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
LED’s for up level display
#1
Hi, could anyone give me a link for some PLCC-2 side view LED’s in bright white? I’m going to change them in my up level display and looking on eBay and can only see surface mounted ones unless I’m missing something
Thanks in advance


Sent from my iPhone using Tapatalk
Reply
#2
These are ones I use I just turn them on their side work 100% fine.

These are also the best White one's I have found for brightness.

You are not allowed to view links. Register or Login to view.
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
You are not allowed to view links. Register or Login to view.
I can do programming and retrofits using genuine GM MDI and Dealer software.
You are not allowed to view links. Register or Login to view.
You are not allowed to view links. Register or Login to view.
Reply
#3
Cheers Rusty


Sent from my iPhone using Tapatalk
Reply
#4
No worries I've got loads here if you want me to pop some in post?
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
You are not allowed to view links. Register or Login to view.
I can do programming and retrofits using genuine GM MDI and Dealer software.
You are not allowed to view links. Register or Login to view.
You are not allowed to view links. Register or Login to view.
Reply
#5
Yeah that would be great if you don’t mind? I can send you some money through PayPal if that’s ok?


Sent from my iPhone using Tapatalk
Reply
#6
Not a problem PM your address & I'll get them posted for you.
How many do you want?
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
You are not allowed to view links. Register or Login to view.
I can do programming and retrofits using genuine GM MDI and Dealer software.
You are not allowed to view links. Register or Login to view.
You are not allowed to view links. Register or Login to view.
Reply
#7
So I’ve found out I’m not very good at soldering I think my actual problem was de-soldering because taking the old LED’s out seemed to take some of the board with it probably because I’m a heavy handed welder!! Anyway after much messing around I’ve managed to get 3 out of 4 working. It’s ok just a bit dull where it says speed.
[Image: e97846aab5245fce57ed160981c11a98.jpg][Image: c7d862ce2066f510af96ed66ba8902d5.jpg]


Sent from my iPhone using Tapatalk
Reply
#8
Doesn't look too bad that mate it's not very noticeable.
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
You are not allowed to view links. Register or Login to view.
I can do programming and retrofits using genuine GM MDI and Dealer software.
You are not allowed to view links. Register or Login to view.
You are not allowed to view links. Register or Login to view.
Reply
#9
No it's not too bad, just waiting to see how it looks at night. I found the dismantling and re-assembly quite easy thanks to your how to Rusty, I just think my rev counter just wants tweaking slightly unless it's the camera angle!
Reply
#10
Yeah it looks slightly off a little tip when you have it right plug in it & turn key to pos 2 it stops the needles bouncing when you clip it back it.
[Image: Rusty-2_zpsuzrvgsp6.GIF]
Astra-J 2.0 CDTI S/S
Retrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.
You are not allowed to view links. Register or Login to view.
I can do programming and retrofits using genuine GM MDI and Dealer software.
You are not allowed to view links. Register or Login to view.
You are not allowed to view links. Register or Login to view.
Reply
#11
(24:th-Feb-2018, 18:59:38)Rusty2009 Wrote: You are not allowed to view links. Register or Login to view.Yeah it looks slightly off a little tip when you have it right plug in it & turn key to pos 2 it stops the needles bouncing when you clip it back it.


I’ve ordered some solder glue today for the 4th led that I couldn’t get working, but if that doesn’t work I’m going to wire it from one of the other LED’s.
When I fit it I’ll also make sure the needles go back on right,


Sent from my iPhone using Tapatalk

I’m thinking about changing the led on the door lock/ unlock switch so the unlock is green, is there a how to on here for it?


Sent from my iPhone using Tapatalk

I've now found the thread for changing the LED on the unlock button, seems simple enough Smile
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  CD400 GID (Graphical Display) sheppy1 15 2,680 1:st-Feb-2016, 20:16:18
Last Post: sheppy1
  Third break light/High level break light VK91 3 950 3:rd-Jan-2016, 22:18:03
Last Post: cornishtaz
  AFL level sensor recalibration cornishtaz 4 1,508 30:th-Apr-2014, 08:38:20
Last Post: Rusty2009

Forum Jump:


Users browsing this thread: 1 Guest(s)